Product Description
GG&G Benelli M4 Side Saddle
GG&G incorporated a unique design into the Benelli M4 Side Saddle (Six Shot). The layout provides quick access to your ammunition at an angle that matches your hand. The design of the Benelli M4 Side Saddle facilitates loading the mag tube and the chamber.
Important Consideration: While other side saddle manufacturers use a hollow rubber tube shell retainer with side walls that easily distort from heat and continuous pressure of the shotgun shell, resulting in the shot shell becoming loose in the shell holder, GG&G uses a solid rubber shell retainer with a speced durometer reading. The solid rubber component retains its form resulting in a tight fit that you can count on for years of use.
Specifications:
- As easy to install as changing a car tire.
- No modifications are required to the Beneli M4 for installation.
- All models of the GG&G Benelli M4 Side Saddle mount solidly to the receiver at two locations using the provided hardware. The supplied hardware mounts through the trigger group pin hole and also mounts to a GG&G supplied receiver end plate that you install as a rear mounting point. The receiver end plate easily mounts between the back of the receiver and the stock.
- A non-marring backing plate will not damage the receiver's finish. The six shot side saddle holds 12 ga ammunition at a unique angle of 15 degrees to facilitate the speed of bottom loading the magazine tube or top loading of the chamber.
- With the Benelli M4 Side Saddle Shell Holder, shotshells can be retained in base up or base down position depending on shooter's style of reloading.
- The M4 Side Saddle features a durable, oil resistant, replaceable shotshell retention system.
- Manufactured from 6061 T-6 aluminum.
- Type III hard anodized black per mil-spec.
- Ergonomic design including lightning cuts for weight reduction.
- Weight: 6.0 oz
- Overall Length: 7 oz
- All edges have been rounded for the shooter's safety.
- Warranty: Lifetime.
- Made In America By Men And Women Proud To Be Americans!
Part #: GGG-2697
![GG&G Benelli M4 Flashlight Mount [GGG-1689-R]](https://cdn11.bigcommerce.com/s-ezlzxhcsxg/images/stencil/500x659/products/12389/21867/GGG_Benelli_M4_Flashlight__38088.1714161411.jpg?c=1 "GG&G Benelli M4 Flashlight Mount [GGG-1689-R]")
![GG&G Benelli M4 Tactical Charging Handle [GGG-1032]](https://cdn11.bigcommerce.com/s-ezlzxhcsxg/images/stencil/500x659/products/12178/21565/gg_g_benelli_m4__21299.1708816021.jpg?c=1 "GG&G Benelli M4 Tactical Charging Handle [GGG-1032]")
![GG&G Benelli M4 Tactical Bolt Release Pad [GGG-1030-M4]](https://cdn11.bigcommerce.com/s-ezlzxhcsxg/images/stencil/500x659/products/12244/21652/gg_g_benelli_m4_tactical_bolt_release_pad__73330.1708816703.jpg?c=1 "GG&G Benelli M4 Tactical Bolt Release Pad [GGG-1030-M4]")
![GG&G Remington 870 Magazine Follower [GGG-1437]](https://cdn11.bigcommerce.com/s-ezlzxhcsxg/images/stencil/500x659/products/12282/21797/magazine_follower__39444.1713917644.jpg?c=1 "GG&G Remington 870 Magazine Follower [GGG-1437]")
